Share
Transferencias de calor personalizadas, Leer descripción
Transferencias de calor personalizadas, Leer descripción
No se pudo cargar la disponibilidad de retiro
Tiempo de procesamiento actual: dos días hábiles
Declaración de política sobre envíos de material gráfico
Responsabilidad del cliente por los gráficos listos para imprimir
Es responsabilidad exclusiva del cliente asegurarse de que todos los gráficos enviados para impresión estén completamente preparados y cumplan con nuestros requisitos. En concreto, esto significa:
- Resolución: Los gráficos deben tener un mínimo de 300 DPI.
- Fondos: El fondo debe ser transparente a menos que se incluya un fondo intencionalmente.
- Precisión: Todos los elementos de ortografía, gramática y diseño deben ser correctos y finalizados.
- Integridad del archivo: los gráficos deben estar completos y listos para imprimir tal como están.
Limitaciones en la creación y edición de imágenes
No creamos, editamos ni compramos gráficos. Si envía una imagen que sea una captura de pantalla o que no esté lista para imprimir sin adquirir nuestro servicio de diseño, su pedido se cancelará.
Impresión de los gráficos enviados
Si envía gráficos con problemas como:
- Un fondo donde debería ser transparente,
- Líneas visibles o artefactos debido a una eliminación incorrecta del fondo.
- Borrosidad o baja resolución,
- Elementos recortados o cortados,
- Ortografía incorrecta u otros errores,
Estos números se imprimirán tal como están. No ofrecemos reimpresiones gratuitas en caso de que haya errores en los gráficos que envíe. Solo se emitirá una reimpresión gratuita si se considera que un error es culpa nuestra.
Al realizar un pedido, usted acepta estos términos y reconoce que es su responsabilidad garantizar que todos los gráficos estén listos para imprimir de acuerdo con nuestras pautas.
Bulk Apparel
Bulk Apparel
Orders over
$250: 5% discount
Orders over
$500: 7% discount
Orders over
$1,000: 10% discount
Bulk Heat Transfer
Bulk Heat Transfer
Buy 20, save 25%
Buy 50, Save 35%
Buy 100, Save 45%
Custom Transfer Policy
Custom Transfer Policy
Policy Statement on Graphic Submissions
Customer Responsibility for Print-Ready Graphics
It is the customer's sole responsibility to ensure that all graphics submitted for printing are fully prepared and meet our requirements. Specifically, this means:
Resolution: Graphics must be at a minimum of 300 DPI.
Backgrounds: The background must be transparent unless a background is intentionally included.
Accuracy: All spelling, grammar, and design elements must be correct and finalized.
File Completeness: Graphics must be complete and ready for printing as-is.
Limitations on Image Editing and Creation
We do not create, edit or buy graphics. If you submit an image that is a screenshot or is not print-ready without purchasing our design service, your order will be canceled.
Please note: If your graphic has a white or black background, that is still considered a background. Please remove it.
Illegal use of graphic
Trademarked, copyrighted, and watermarked graphics will not be printed.
Printing of Submitted Graphics
If you submit graphics with issues such as:
A background where it should be transparent,
Visible lines or artifacts from improper background removal,
Blurriness or low resolution,
Cropped or cut-off elements,
Incorrect spelling or other errors,
These issues will be printed as-is. We do not offer free reprints for errors in the graphics you submit. A free reprint will only be issued if a mistake is deemed to be our fault.
By placing an order, you agree to these terms and acknowledge that it is your responsibility to ensure all graphics are print-ready according to our guidelines.
Press Settings
Press Settings
Follow these simple steps for flawless, professional-quality transfers:
Set Your Heat Press Temperature: Adjust your press to 320°F for optimal results.
Pre-Press the Garment: Remove any moisture or wrinkles by pressing the garment for a few seconds.
Position the Transfer: Place the DTF transfer design side down onto your garment.
Cover with Protective Film: Use the provided protective film to ensure even pressure and protection.
Press the Design: Apply heat for 20-30 seconds using medium pressure.
Peel the Transfer: Perform a hot or cold peel, though a cold peel is recommended for best results.
Finish with a Second Press: After peeling, place the protective film back over the design and press again for 5 seconds to secure the image and enhance durability.
By following these steps, you’ll achieve vibrant, long-lasting designs with ease.
Care
Care
To keep your DTF-printed apparel vibrant and long-lasting, follow these care tips:
Washing: Machine wash in cold water, inside-out, on a gentle cycle. Use the recommended amount of detergent for your washer.
Avoid Fabric Softeners: Fabric softeners are not recommended as they can affect the transfer's durability.
Drying: Tumble dry on a low cycle, but air drying is preferred to maintain the quality and longevity of the print.
By following these care instructions, your custom apparel will stay bold and beautiful wear after wear!
